1. Introduction of Warehouse Tent

The clear span of the Big Warehouse Storage Tent-BT Series is 10m, 12m, 15m, 20m, 21m, and 25m. The main profile size is 204X120X4mm and the modular structure can be increased and decreased in bay distance of 5m according to the clients' request. The main frameworks (upright support and roof beam) are manufactured of high impact extruded anodized aluminum (6061/T6). The PVC covers use PVC-coated polyester textile and flame retardance which is based on the European standard DIN 4102B1, M2.

2. Application of Warehouse Tent

The tent attached is our 20X25m warehouse tent, it is equipped with blue sandwich sidewall, with 1 big electril rooling door and one man aluminum door. The tent series are widely used as the temporary or semi-permanent warehouse, storage tent, industrial tent or workshop tent.

3. Specification of Warehouse Tent (BT series)

Main frame profile size for BT series: 204X120X4mm

Wind load: 100km/h

Eave/Corner Connection: Hot-DIP galvanized

Minimum tent length: In order to reach the designed wind load and make sure the tent is safe, please set up the tent with the required minimum tent length.

4. Materials of Warehouse Tent

Fabric: Double PVC coated polyester fabric, 750-900g/sq. M, water proof, UV resistance, fire retardant according to standard NFPA701, CFM & DIN4102 B1/M2

Frame: Hard pressed extruded aluminum 6061/T6, anodized surface finishing.

Connections: Hot-DIP galvanized

5. Colors available

White, red, yellow, blue, green, black, grey, transparent etc

6. Product certificates:

Fabric: Test reports for the fire retardant, standards: NFPA701, CFM & DIN4102 B1/M2

Structure safety: Certificates by the registered engineers in the U. S. A & Australia.